Algo 8410 User Manual page 59

8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
Introduction Section on Status Page
Allows the introduction text to be hidden from the login screen.
Show Status Section on Status Page when Logged Out
Use this option if you wish to block access to the status page when logged out. The settings and configurations, on the
status page, will be hidden entirely unless you're logged in – this feature is useful when you want only trusted users to
view possible sensitive device information.
Display Switch Port ID on Status Page
Enable this option to display the Switch Port ID. This option requires the 8410/8420 to be connected to a switch that
supports LLDP or CDP.
Web Interface Session Timeout
Set the maximum period of inactivity after which the web interface will log out automatically.
Play Tone at Startup
A tone can be played at start up to confirm that the device has booted.
Log Settings
Log Level
The Log Level is to be used on the advice of Algo technical support only.
Log Method
Allows the 8410/8420 to write to external Syslog server if the option for external (or both) is selected.
Log Server
If 'Network' or 'Both' is selected this is the address of the Syslog server on the network.
Management
Web Interface Protocol
HTTPS is always enabled on the device. Use 'HTTPS Only' mode to disable HTTP, then requests will be automatically
redirected to HTTPS. Also note that since the device can have any address on the local network, no security certificate
exists, and thus most browsers will provide a warning when using HTTPS.
Force Strong Password
When enabled, ensures that a secure password is provided for the device's web interface for additional protection.
The password requirements are:
AL061-UG-GP258410-001-R0 support@algosolutions.com Page 58