Table of Contents
Advertisement
8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
VLAN Priority
Sets the frame priority level. Otherwise known as Priority Code Point (PCP), VLAN Priority is a 3-bit field which refers
to the IEEE 802.1p priority. It indicates the frame priority level. Values are from 0 (lowest) to 7 (highest).
802.1X Port-based Network Access Control
802.1x Authentication
Credentials to access LAN or WLAN that have 802.1X network access control (NAC) enabled. This information will be
available from the IT Administrator.
Authentication Mode
Select the desired authentication mode.
Anonymous ID
If configured, the 8410/8420 will send the anonymous ID to the authenticator instead of the 802.1X client username.
ID
The ID should contain a string identifying the IEEE 802.1X authenticator originating the request.
Password
Enter the password.
Validate Server Certificate
Validate the authentication server against common authorities. To validate against additional certificates, go to the
System → File Manger to upload a Base64 encoded X.509 certificate file in .pem, .cer, or .crt format to the
'certs/trusted' folder.
Differentiated Services
This provides quality of service if the DSCP protocol is supported on your network. The Differentiated Services can be
specified independently for SIP control packets versus RTP and RTCP audio packets.
SIP (6-bit DSCP value)
Enter the DSCP value for SIP packets.
RTP (6-bit DSCP value)
Enter the DSCP value for RTP packets.
AL061-UG-GP258410-001-R0
support@algosolutions.com
Page 54
Advertisement
Table of Contents
