Table of Contents
Advertisement
8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
Common
Internet Protocol
DHCP is an IP standard designed to make administration of IP addresses simpler. When selected, DHCP will
automatically configure IP addresses for each 8410 or 8420 on the network. Alternatively, the 8410/8420 can be set to
a static IP address.
DNS Servers
Add one or multiple DNS servers. Separate each server by a space, comma, or semicolon.
IPv4
IPv4 Method
The 8410/8420 can be set to a DHCP or a static IP address. When DHCP is selected, the DHCP will automatically
configure IP addresses for each 8410 IP Display Speaker or 8420 IP Dual-Sided Display Speaker on the network.
IPv4 Address/Netmask
Enter the static IP address and netmask (CIDR format) for the 8410/8420 (e.g., 192.168.1.23/24).
IPv4 Gateway
Enter the gateway address.
802.1Q Virtual LAN
VLAN Mode
Enables or Disables VLAN Tagging. VLAN Tagging is the networking standard that supports Virtual LANs (VLANs) on an
Ethernet network. The standard defines a system of VLAN tagging for Ethernet frames and the accompanying
procedures to be used by bridges and switches in handling such frames. The standard also provides provisions for a
quality-of-service prioritization scheme commonly known as IEEE 802.1p and defines the Generic Attribute
Registration Protocol.
VLAN ID
Specifies the VLAN to which the Ethernet frame belongs. A 12-bit field specifying the VLAN to which the Ethernet
frame belongs. The hexadecimal values of 0x000 and 0xFFF are reserved. All other values may be used as VLAN
identifiers, allowing up to 4094 VLANs. The reserved value 0x000 indicates that the frame does not belong to any
VLAN; in this case, the 802.1Q tag specifies only a priority and is referred to as a priority tag. On bridges, VLAN 1 (the
default VLAN ID) is often reserved for a management VLAN; this is vendor specific.
AL061-UG-GP258410-001-R0
support@algosolutions.com
Page 53
Advertisement
Table of Contents
