Table of Contents
Advertisement
Display Name (Optional)
Enter a 'Display Name' that will be sent when the SIP call is made. The PBX and phone(s) will have to be configured to
display this message as the Caller ID.
Prompt Tone
Select a tone to play when the passcode is ready to be entered.
Announcements
Announcement 1
To configure an emergency alert extension, select 'Enable' beside the target announcement and enter the Extension,
Authentication ID, and Authentication password.
Up to 10 extensions can be registered allowing up to 10 different announcements. Audio files can also be easily
uploaded to create custom announcements. Only one 'Call-to-Cancel' extension is needed, despite the number of the
alert extensions.
Note
Some SIP phone systems may not support this feature if they limit the number of extensions that can be
registered on a single device.
Announcement Duration
Choose how long to allow for the announcement duration. An announcement can:
•
Play Once
•
Play Until Cancelled
•
Default
Extension
This is the SIP extension for the Call-to-Cancel Selection parameter of the 8410. The device will auto-answer any
inbound call received on this extension and provide a voice paging path (and multicast if configured).
Authentication ID
The Authentication ID may also be called Username for some SIP servers and in some cases may be the same as the
Ring and/or Page extension.
Authentication Password
The SIP password is provided by the system administrator for the SIP account.
AL061-UG-GP258410-001-R0
8420 IP Dual-Sided Display Speaker
support@algosolutions.com
8410 IP Display Speaker &
Page 49
Advertisement
Table of Contents
