Multicast (Receiver Settings); Figure 5: Multicast Receiver Mode Settings - Algo 8410 User Manual

8410 IP Display Speaker &
8420 IP Dual-Sided Display Speaker
5.4

Multicast (Receiver Settings)

Figure 5: Multicast receiver mode settings

Multicast Mode
Multicast Mode (Receiver Selected)
If Receiver mode is enabled the 8410 or 8420 will activate when receiving a multicast message. It will mimic the audio
stream but use local volume settings ('Page Speaker Volume' in Basic Settings → Features).
Multicast Type - Regular
Select "Regular" if receiving multicast from other Algo SIP endpoint(s) and/or multicast- enabled phone(s) that use RTP
audio packets.
Number of Zones
Select 'basic' zones if configuring nine or fewer multicast zones or 'expanded' to configure up to 50 zones. The
expanded zones have the same behaviour as the basic Receiver zones but are hidden by default to simplify the
interface.
AL061-UG-GP258410-001-R0 support@algosolutions.com Page 33