5.3
Multicast (Transmitter/Sender Settings)
Note
See (Advanced Settings > Advanced Multicast) section for more information on populated IP values.
Multicast Mode
Multicast Mode (Transmitter/Sender Selected)
If Transmitter mode is enabled the 8410 or 8420 will broadcast an IP stream when activated in addition to playing the
audio. (Note that the 8410 or 8420 cannot be both a multicast Transmitter and Receiver simultaneously).
Multicast Type
The 8410 or 8420 may broadcast multicast paging, compatible with Polycom "on premise group paging" protocol and
most multicast-enabled phones that use RTP audio packets.
AL061-UG-GP258410-001-R0
8420 IP Dual-Sided Display Speaker
Figure 4: Multicast transmitter mode settings
support@algosolutions.com
8410 IP Display Speaker &
Page 30