Control Panel Installation Manual - Immergas MAGIS M4-30 Use And Installation

.5 CONTROL PANEL INSTALLATION MANUAL.

7.5.1 Safety precautions.
• Read the safety precautions carefully before installing the unit.
• It is recommended to strictly abide by the important safety tips given below.
• Make sure that nothing anomalous occurs during execution of the test and completion of installation, then deliver the
manual to the user.
• Meaning of symbols:
CAUTION
with the risk of electric shocks or re.
Strictly follow the instructions in this manual. Incorrect installation could cause electric shocks or re.
Re-installation must be carried out by quali ed technicians. Incorrect installation could cause electric shocks or re.
Do not take it upon yourself to disassemble the unit.
Incorrect disassembly could cause malfunctioning or overheating with the resulting risk of re.
CAUTION
could burst into a re.
Wiring must be adequate to the current intensity of the control panel. Otherwise an electric dispersion could occur
with consequent risk of re.
Use the cables indicated in the wiring diagram. Do not apply any external force to the terminal. Otherwise the wires
could break, heat up and cause a re.
.5.2 Other precautions.
• Place of installation.
Do not install the unit in places where there are large amounts of oil, vapour, sulphurous gases.
Otherwise the appliance could deform and become unusable.
• Preparation prior to installation.
1) Check that the following components are all present:
1 Control panel
2 Self-tapping round Philips head screw
3 Round Philips head screw
4 Use and installation manual
5 Plastic spacer
6 Plastic plug
Name Qty
1
3 For wall-mounting
2 For mounting on electric switchgear
1
is accessory is used to install the control panel
2
inside the electric cabinet
3 For wall-mounting
Notes
-
-