Immergas MAGIS M4-30 Use And Installation page 20

Block heat pumps
Hide thumbs Also See for MAGIS M4-30:
Table of Contents

Advertisement

will do).
Turn the outlet side of the air towards the wall of the building, fence or screen.
Arrange the outlet side at a right angle with respect to the wind direction.
repare a water discharge channel around the foundation, to drain the water around the unit.
• If the water has di culty owing out of the unit, mount the unit on a cement block foundation, etc. (approximately 100
mm (3.93 in) high).
• If the unit is installed on a frame, assemble a waterproof plate (about 100 mm) on the lower side of the unit to prevent
the water from entering from below.
• When the unit is installed in a place frequently exposed to snow, please pay particular attention to raise the foundation
as high as possible.
• If the unit is installed on a building structure, please install a waterproof tray (about 100 mm on the bottom side of the
unit) so that the drain water does not ow out (See image below).

Advertisement

Table of Contents
loading

Table of Contents