Immergas MAGIS M4-30 Use And Installation page 109

TEST RUN.
TEST RUN is used to check correct operation of the valves, de-aeration, operation of the circulation pump, cooling, heating
and domestic hot water heating.
Go to MENU>FOR SERVICEMAN>11.TEST RUN.
Press OK. e following page will be displayed:
If YES is selected, the following pages will be displayed:
If POINT CHECK is selected, the following pages are displayed:
Press
lected and ON/OFF is pressed, if the 3-way valve is open/closed, then operation of the 3-way valve is normal, as are the
other components.
CAUTION
pump could be damaged.
11 MODALITÀ TEST
Attivare le impostazioni e la
"MODO TEST"? 'TEST RUN'?
NO NO SÌ
OK CONFERMARE
11 MODALITÀ TEST
11.1 CONTROLLO PUNTI 11.1 POINT CHECK
11.2 SFIATO ARIA
11.3 POMPA CIRCOLATA IN FUNZIONE
11.4 ATTIVAZIONE MODO FREDDO
11.5 ATTIVAZIONE MODO CALDO
OK CONFERMA
11 MODALITÀ TEST
11.6 ATTIVAZIONE MODO ACS 11.6 DHW MODE RUNNING
OK CONFERMA
11 MODALITÀ TEST
VALV. 1 3-VIE
3 WAY-VALVE 1
VALV. 2 3-VIE
POMPA I
POMPA O
POMPA C
ON/OFF ON/OFF
11 MODALITÀ TEST
POMPA SOLARE PUMPSOLAR
POMPA ACS
RISC. RISER. INTERNO
RISC. ACC. ACS
VALV. 3 3-VIE
ON/OFF ON/OFF
1/2
OFF
OFF
OFF
OFF
OFF
2/2
OFF
OFF
OFF
OFF
OFF
-