Table of Contents
Advertisement
6. Close Communication Gland 1 to a torque of 5.5 N*m.
Connecting an External CT to the Energy Meter
(Optional)
To enable import/export or consumption metering, connect an external current
transformer (purchased separately from SolarEdge) to the Energy Meter.
To connect an external CT:
Open the CT gland at the bottom of the Connection Unit.
1.
2. Feed the CT wires through one of the gland openings.
3. Connect the CT wires to Energy Meter's L1 CT connector, as shown below.
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5
Figure 14: Connecting the Backup Interface
Chapter 5: Connecting the
Inverter 37
Advertisement
Table of Contents
Troubleshooting
