Chapter 3: Installing the Inverter
Install the inverter either before or after the modules and power optimisers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.
Inverter Package Contents
SolarEdge Home Hub Inverter Single Phase
Wall mounting bracket
One 9V battery
installation guide
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the SolarEdge monitoring platform.
Unpacking the inverter
Extract the inverter out of the carton box following the on-package instruction.
CAUTION!
Do not place the inverter vertically on the ground as this may damage the
connectors.
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5
Chapter 3: Installing the
Inverter 21