System Manager Kit" User Settings; Start-Up; Main Page; Programming Current Time And Day - Immergas System Manager Kit Instructions And Warnings

2
"SYSTEM MANAGER KIT" USER
SETTINGS
It is possible to set / modify the following parameters:
- DHW temperature;
- comfort and low temperature levels;
- daily / weekly hourly program operating / holiday timer
program;
- assistance menu.
2.1

START-UP.

2.1.1 Main page

The main page (M01) shows the status of the main area.
In particular, the following are visible:
- name of the area;
- room temperature;
- room humidity.
08:50 FR 10/06/11
Salotto
T: 00.0 °C
U: 00.0 %
2-1

2.1.2 Programming current time and day

Press the
Press buttons
GRAMMING".
Press button
mode (K01).
Press the
the hours to flash.
Set as desired by pressing arrows
press button
to start blinking.
Proceed in the same way adjusting the minutes, day of
the week, day, month and year.
At the end press button
main screen.
M01
9 9
button to enter the navigation menu.
until selecting menu "02. PRO-
to enter current "Time and Day"
button again to make the value indicating
to confirm and for the minute figure
twice to go back to the
. At the end,