Table of Contents
Advertisement
4
2
Key:
1 - Main parameters switch with button to confirm and save data
2 - Left context button
3 - Right context button
4 - Display
7.3
NOTES FOR THE
ZONE REMOTE PANEL
Please refer to the relevant instructions sheet for in-
stallation and use instructions. The required addresses
to use are:
41 = Zone 1
42 = Zone 2
43 = Zone 3
44 = Zone AT
The communication parameters are:
Baudrate = 9600
Parity bits = None
Stop Bits = 2
These parameters can be found in:
Menu\Service\Device Conf.
12:34
Ma 8 Lug 2014
20.6
67%
13°C
Zona 1
Set ambiente 21.0°C
Modo
Zona
53 53
°C
Menu
7.4
NOTES FOR DOMINUS (OPTIONAL).
The system can be remote controlled using the optional
Dominus kit.
Make the connection to the appliance as shown (Wiring
diagram Parag. 9.35).
The following is necessary to enable Dominus:
- position the Dip Switches: OFF-OFF-OFF-OFF;
- set the System supervision parameter on the control
panel = Domin;
- configure the profile of the Dominus APP on System
Manager or alternatively on Magis Pro-Combo V2.
The Dominus firmware must be updated to at least
revision 2.02.
For further information, consult the relative instruction
sheet.
3
1
7-12
Advertisement
Table of Contents
