Immergas System Manager Kit Instructions And Warnings page 52

Room temperature manual adjustment. In the event the
time slots are not used, one can set the room temperature
simply by turning the main selector.
Once the required room temperature is set, the display
will go back to showing the measured room temperature.
Room humidity adjustment. To display the humidity
in the room, press the main selector, during the display
of the humidity one can change the desired humidity
value, simply by turning the main switch.
By pressing the new selector, the zone flow set and the
system active dhw set can be displayed.
Anomalies display. In the event there is an anomaly in
progress, the remote control displays the status via the
symbol " ".
7-9
7-10
52 52
7-11