Immergas System Manager Kit Instructions And Warnings page 50

Ignition. Press and hold the "on / off
remote control goes into stand-by and displays the
operating modes, the room temperature and the time.
Operating mode selection. By pressing the "Mode
button one can select the operating mode of the system
in cyclic mode between:
- "Summer with cooling "
cooling (performed by the heat pump) and domestic
hot water production mode.
- "Winter " ", system operating in room heating and
domestic hot water production mode.
- "Domestic hot water
hot water production mode only.
" button; the
7-4
", system operating in room
", system operating in domestic
Time slots adjustment. The "Time band" parameter
enables to adjust the room temperatures in time slots,
it is possible to adjust up to a maximum of 6 time slots
and the programming can be set day by day for the whole
week, for 5 days (Mon-Fri) and 2 days (Sat-Sun).
Press and hold the "time band
" " function appears, turn the main selector
Clock
until the "
Time band
"
Select the function and adjust the time slots.
- Select the interval of days that one wishes to program,
the days being programmed flash.
50 50
" button until the
" parameter appears
7-5
7-6