Table of Contents
Advertisement
5
SERVICE
MENU
In these pages of the menu it is possible to:
- set device language;
- display further system INFO.
Press the
button to enter the navigation menu.
Pre ss buttons
"07. SERVICE".
Press the
button to enter the menu.
From this screen it is possible to access the submenu
to manage and configure the work parameters for
the peripherals installed in the system. Some of these
submenus are protected by a code (which can be used
exclusively by the Immergas technician) while others are
also visible to the user.
5.1
LANGUAGE MENU.
• Language. It is possible to choose the language that
will be used in the application (Italian or English)
Press the arrows
Press the
button to enter the submenu (L01).
L a n g u a g e
Current language:
ENGLISH
5-1
Press the
button again to make the language that
requires changing to flash.
Press the arrows
At the end, press the
"TECHNICIAN MENU".
u nt i l s el e c t i ng me nu
and select "01. Language".
L 0 1
to select the desired language.
button to go back to the
5.2
INFORMATION MENU.
It is possible to view the firmware version of the device.
There is also information relative to system operation
and to the heat pump connected.
In particular, it is possible to view detailed information
on:
- VERSION: firmware version and other system data.
- STATUS: parameters that identify the system opera-
tional mode.
- COMMUNICATION: status of devices connected on
the network.
- HEAT PUMPS: detailed information on the heat
pumps.
- INTEGRATION: detailed information on integration
generators.
- INPUT/OUTPUT: system inputs and outputs.
Press the arrows
Press the
button to enter the submenu.
Press arrows
to display the next screens of menu
" 02. Information".
- Heat pump (N11). The option lets you view detailed
information on heat pumps.
At the end press button
main screen.
At the end, press the
"TECHNICIAN MENU".
5.3
FUNCTIONS PROTECTED BY CODE
The sub-menus listed below, included in menu "07. SER-
VICE" are advanced settings (reserved to a qualified tech-
nician) and a password must be entered to access them.
- 03. System definition.
- 04. Thermoregulation.
- 05. DHW.
- 06. Solar system.
- 07. Integration.
- 08. Supervisor.
- 09. Reset Counter.
- 10. Manual.
- 11. Start Up.
- 12. Cascade parameters.
19 19
and select "02. Information".
twice to go back to the
button to go back to the
Advertisement
Table of Contents
