Table of Contents
Advertisement
3
INFORMATION
In the following pages it is possible to view the main
system information, in particular parameters relating to:
- zone management;
- domestic hot water;
- heat pump management;
- integration generator management;
- other functions.
Press the
button to access the programming menu.
Press buttons
until selecting menu "05. INFO".
Press the
button to enter the menu.
Within the menu, using the
the data of interest for the user.
3.1
ZONE MENU.
- Heat pump probes temperature (I01)
- Temperature required for area systems (I02, I03 and
I04).
The presence of a request from a zone is highlighted
with an asterisk.
The request for dehumidification of neutral air is
highlighted with a D.
The request for dehumidification of cooled air is high-
lighted with an A.
- Dew point (I05)
- Zone probe temperature (I07 - I14)
In the event of active requests for dehumidification
with neutral air or dehumidification with cooled air
the relative icons will be displayed.
3.2
- D.H.W. data (I51, I52 and I53)
3.3
- Heat pump data (I21 ÷ I24)
3.4
arrows, one can view
- Machine performance (I31)
- Integration data (I32)
3.5
- Solar probes temperature (I41)
- Puffer temperature (I42)
- Additional functions probes temperature (I43)
- Tonnes of CO
- Sundry inputs (I45)
3.6
It is possible to read the operating hours of the heat
pump, the auxiliary central heating and the solar pump.
- Heat pumps (O01 to O04)
- Boiler (O05)
- Electric heaters (O06)
- Solar/Puffer (O07)
17 17
DHW MENU.
Info
DHW
Setpoint
:
DHW Temp
:
Request
:
Antileg.
:
3-1
HEAT PUMP MENU.
INTEGRATION GENERATOR MENU.
OTHER FUNCTIONS MENU.
saved by using the heat pump (I44)
2
HOURS OF OPERATION
I51
40 °C
45.0 °C
OFF
OFF
Advertisement
Table of Contents
