Table of Contents
Advertisement
- Heat pump temporary enable command (D05). The
option lets you enable heat pumps according to the
time slots that will be set in the next page (D06).
Press button
for the option "Disable heat pumps"
to start blinking.
Press arrows
(NO) any option. Press the
the modification.
At the end press button
main screen.
In case of heat pump temporary enable you can set the
ignitions calendar (D06).
- Integration manual disable command (D07). Enables
the operation of the secondary generator to be perma-
nently disabled.
- Heat pump noise reduction (D08). In units where
this function is present, it allows you to set the noise
reduction mode.
to confirm (YES) or cancel
button to validate
twice to go back to the
16 16
Advertisement
Table of Contents
