Advertisement
DAILY USE
Charging
Charging your charger – electrical outlet
NOTICE
Use of incompatible parts poses a risk of malfunction.
Use only the USB cable that is provided with the device.
X
Use standard USB power adapter which supports an
X
output voltage of 5 V DC and an output current of
0.5 to 1 A.
Ensure your electrical plug complies withthe requirements.
X
Refer to the section "Requirements for the electrical plug".
Connect the USB-C side of the USB power cable to the USB port
X
of the charger .
Connect the other side of the USB power cable to a suitable
X
electrical plug .
8
The internal battery starts charging. When hearing aids are inserted,
they start charging as well. The charging status of the charger is
shown permanently.
Charging your charger – wirelessly
Place the charger on
X
a wireless Qi certified
transmitter pad.
After a few seconds
X
the internal battery
will start charging
indicated by the
pulsing green LED
of the charger.
When hearing aids are inserted, they start charging as well
X
indicated by the pulsing green LED of the hearing aids LED.
If the LED is off, please re-align the charger to the center of the
Qi transmitter pad.
The charging status of the charger is shown until it is fully charged.
X
After that the LEDs are turned off for power saving reasons.
The charging status of the charger is shown until it is fully charged.
X
After that the LEDs are turned off for power saving reasons.
9
Advertisement
