Advertisement
Quick Links
Installation Guide
PoE Injector
Note:
For simplicity, we will take TL-POE160S for example in this Guide.
Connection
Powered Device (PD)
IP Camera
Note:
1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
2. For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.
AP
IP Phone
LED Explanation
PWR
On:
Power on
Off:
Power off
PoE (Only for TL-POE170S)
On:
Normal power supply
Off:
No powered device connected
Flashing:
PoE+ Injector
PWR
PWR+DATA OUT
DATA IN
Abnormal power supply
Ethernet Device
(switch, router, etc.)
Advertisement
Related Manuals for TP-Link TL-POE260S
Summary of Contents for TP-Link TL-POE260S
- Page 1 LED Explanation Installation Guide Power on Off: Power off PoE Injector PoE (Only for TL-POE170S) Normal power supply Off: No powered device connected Flashing: Abnormal power supply Note: For simplicity, we will take TL-POE160S for example in this Guide. Connection Ethernet Device PoE+ Injector Powered Device (PD)
- Page 2 Storage Humidity 5% to 90% RH non-condensing Safety Information TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, Keep the device away from water, fire, humidity or hot environments.
- Page 3 備考2. 〝○〞 係指該項限用物質之百分比含量未超出百分比含量基準值。 We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.