THOMSON TCH153E Operating Instructions Manual page 24

Setting the temperature
Plug the freezer in the mains socket. The default factory temperature is set at -18°C.
Repeatedly press
Fast freezing mode
This mode will help food to freeze quickly and retain its nutrients, vitamins, flavours and appearance.
Press to enter the fast freezing mode. The indictor light
The temperature will be -26°C and cannot be adjusted.
This mode will be automatically deactivated after 24 hours of operation.
To manually deactivate this mode, in unlock state press any button.
Lock/unlock function
This function allows you to lock or unlock the buttons.
When the freezer is operating, press and hold
will show "Loc" and the buttons are locked.
To unlock the buttons, press and hold
show "UnL".
Power off memory
In case of power failure, the previous temperature setting will be memorised. When the power is
restored, the freezer will operate at the previous temperature setting.
Error codes
When the following code appears on the display, then failure occurs in the freezer.
Code Description
FE The temperature sensor malfunctions. The compressor will stop working for 20
minutes before restarting. If the compressor doesn't restart after 20 minutes, contact
customer service.
EH After the compressor continuously works for 7 hours, or after 9 hours of accumulated
compressor operation, the temperature in the cabinet will be tested. If the
temperature in the cabinet is higher than the set temperature + 6ᵒC for more than 1
hour, the current temperature and "EH" will be displayed alternately. When the
temperature in the cabinet reaches the set temperature, the error code will disappear
from the display.
EL After the compressor continuously works for 7 hours, or after 9 hours of accumulated
compressor operation, the temperature in the cabinet will be tested. If the
temperature in the cabinet is lower than the set temperature - 6ᵒC for more than 1
hour, the current temperature and "EL" will be displayed alternately. When the
temperature in the cabinet reaches the set temperature, the error code will disappear
from the display.
FU The internal temperature hasn't reached lower than -8ᵒC after operating for 10
hours. Once the temperature reaches -10ᵒC, the error code will disappear and the
display will return to normal. If the temperature doesn't get below -8ᵒC after
operating for 10 hours and the error code persists, contact a customer service.
/ to select the desired temperature from -14°C to -24°C.
and at the same time for 3 seconds. The display
and at the same for 3 seconds again. The display will
6
will illuminate.