Foundation Fieldbus Communication; Option Modules; Digital I/O Module (Dio) 6Dr4004-6A / -8A - Siemens SIPART PS2 Operating Instructions Manual

7.3.3

FOUNDATION Fieldbus communication

Communication group and class According to the technical specification of the Fieldbus Foundation for H1 communication
Function blocks
Execution times of the blocks
Physical layer profile
FF registration
Device address
7.4

Option modules

7.4.1

Digital I/O Module (DIO) 6DR4004-6A / -8A

3 digital output current circuits
• Digital output A1: Terminals 41 and 42
• Digital output A2: Terminals 51 and 52
• Fault message output: Terminals 31 and 32
• Auxiliary power supply U
• Signal status
High (not addressed)
Low *) (addressed)
*) The status is also Low if the
basic device is faulty or without
a auxiliary power.
• For connecting to circuits with the
following peak values
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
Group 3, Class 31PS (Publisher Subscriber)
1 resource block (RB2)
1 analog output function block (AO)
1 PID function block (PID)
1 transducer block (standard advanced positioner valve)
AO: 60 ms
PID: 80 ms
123, 511
Tested with ITK 5.0
22 (when delivered)
Without explosion pro‐
tection or suitable for use
in Ex "db" version
6DR4004-8A
≤ 35 V and the current con‐
Aux
sumption is to be limited to
< 25 mA
Conductive, R = 1 kΩ,
+3/-1 % *)
Deactivated, I
R
*) When using in the flame‐
proof enclosure, the cur‐
rent consumption must be
restricted to 10 mA per dig‐
ital output.
-
With explosion protec‐
tion Ex "ia", "db ia"
6DR4004-6A
-
≥ 2.1 mA
< 60 µA ≤ 1.2 mA
Switching threshold for
supply according to
EN 60947-5-6:
U = 8.2 V, R
Aux
U ≤ 15 V DC
i
I ≤ 25 mA
i
P ≤ 64 mW
i
7.4 Option modules
With explosion protec‐
tion
Ex "ic", "ec", "tb"
6DR4004-6A
-
≥ 2.1 mA
≤ 1.2 mA
Switching threshold for
supply according to
EN 60947-5-6:
= 1 kΩ U = 8.2 V, R
i Aux
"ic":
U ≤ 15 V DC
i
I ≤ 25 mA
i
"ec"/"tb":
U ≤ 15 V DC
n
Technical data
= 1 kΩ
i
69