Connecting
4.3 Pneumatic connection
Note
Leakage
Besides continuous air consumption, a leakage can cause the positioner to try to compensate
the position deviation. This will result in premature wear in the entire control device.
• Check offline for leakage using the "11.LEAK" diagnostic parameter.
• If there is leakage, check the pneumatic connections for leaks.
4.3.1
Pneumatic connection for 6DR5..0/1/2/3
①
②
③
④
*) for double-acting actuators
Figure 4-12
36
Output: Actuating pressure Y2 *)
Input: Supply pressure PZ
Output: Actuating pressure Y1
Exhaust air outlet with sound absorber, thread G¼
Pneumatic connection, example
Compact Operating Instructions, 11/2022, A5E03436620-AG
SIPART PS2 (6DR5...)