Page 1
STEEL MESH CART OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#46376...
Thank you very much for choosing this Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS STEEL MESH CART USE AND CARE Do not modify the Steel Mesh Cart in anyway. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the Steel Mesh Cart was designed.
Page 4
2. Assemble the rear support using: D. (6) Rear axle support X1, (7) Left axle brace X1, (8) Right axle brace X1. 3. Assemble the (1) Cart bed to the front support and rear support using: E. (16) Washers X10, (17) Nut w/Lock Insert X10, (21) Carriage Support Bolt X10 Page of 10...
Page 5
4. Assemble the (5) 10" Wheels by using: F. (19) Wheel Nuts X4, (20) Wheel Washer X4. Page of 10...
Page 6
5. Install the Side-Fence (2), Front Fence (3) Back Fence (4) (Ensure the Fence can fold completely down for correct assembly before using). G. (14) Fence Assembly Pin X8. Page of 10...
Page 7
6.Install the Pull Handle (11) by using: H. (17) Nuts w/Lock Inserts X1 (16) Washers X1 (17) Nut w/Lock Insert X1 (23) Pull Handle Bolt X1. 7. Make sure all bolts and nuts are securely tightened. Page of 10...
MAINTENANCE • Maintain your Steel Mesh Cart. It is recommended that the general condition of any Steel Mesh Cart be examined before it is used. Keep your Steel Mesh Cart in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Page 9
Front Axle Brace Pull Handle Center Axle Brace Front Wheel Support Brace Fence Assembly Pins Handle plastic part Washers 8mm Nuts w/Lock Inserts (8mm) Wheels Nuts Wheel Washer (12mm) Carriage Support Bolts (8mx20mm) Carriage Support Bolts (8mx15mm) two step Washers 6mm Nuts w/Lock Inserts (6mm) Pull Handle Bolt...
WARRANTY One-year limited warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.com Made in China Page of 10...