Anker PowerConf H700 - Wireless Headphones Quick Start Guide

SUPPORT

For FAQs, detailed user manuals, and other information, please visit www.ankerwork.com

APP/SOFTWARE

Download the AnkerWork app or software to adjust EQ, upgrade firmware, transcribe a call or online meeting, and fully enhance your experience.

Transcribing is only available when using the headset and USB Bluetooth receiver via the AnkerWork software in a PC. Transcription service includes a free trial. Further use requires a fee.

WEARING

The headset can be worn with the mic boom on either side. When switching from one side to the other, the mic boom must be lowered all the way down and directed towards your mouth so that the volume adjustment direction and sound channels can be adjusted accordingly.

ASSEMBLING

Slide the upper piece into position to securely assemble the charging stand.

CHARGING

Fully dry off the USB-C charging port before charging.

CHARGING WITH STAND

*Only available for the version with the charging stand.

Align the charging pins on both the headset and the charging stand for successful charging.

POWERING ON/OFF

Press and hold the power button for 2 seconds to power on, or 5 seconds to power off.

When the headset is on, the light on the earcup will flash blue once every 4 seconds.

Plug the USB Bluetooth receiver (with the USB adapter, if necessary) into your PC's USB port. PowerConf H700 will automatically connect to your PC when powered on. Alternatively, press and hold the power button for 5 seconds to enter Bluetooth pairing mode when powered off. Make sure to select "Anker Soundsync" as the audio input and output device for your conferencing software and computer.

DUAL PAIRING

To pair with another device when already connected with one device, press the power button twice until the LED indicator flashes blue.

WEARING DETECTION

When you take off PowerConf H700, the playback will auto-pause within 2 seconds, and ANC and transparency will turn off within 10 seconds. You can put on the headset to answer an incoming call. You can also enable the autoplay on wearing function in the AnkerWork app.

There are three ways to mute your headset: by pressing the mute button, by moving the earpiece with the mic boom outward for 2 seconds, or by lifting the mic boom.

Enable Smart Mute in the AnkerWork app or PC software to automatically mute microphone when moving the earpiece with the mic boom outward.

RESET

Press the power button and the rotation button simultaneously for 5 seconds until the LED indicator on the mic boom flashes red for 5 seconds.