SolarEdge
Home Hub Inverter - Single Phase
Quick Installation Guide
For Europe
What's in the Package
Inverter
Wall mount bracket
WARNING!
This symbol denotes a hazard. It calls attention to a procedure that if not correctly
performed or adhered to could result in injury or loss of life. Do not proceed beyond
a warning note until the indicated conditions are fully understood and met.
CAUTION! Denotes a hazard. It calls attention to a procedure that, if not correctly
performed or adhered to, could result in damage or destruction of the product. Do not
proceed beyond a caution sign until the indicated conditions are fully understood and met.
A
Mounting
12.6 KG
Optional
Holes
3
2
Wiring
B
PV String(s)
2
SolarEdge Home Battery 400V
3
SolarEdge Home
Network Antenna
1
Ø 9mm
Optional
4 N*m
4
5
4 N*m
6
WARNING! Connect a
ground cable if required
by local regulation.
6 N*m
solaredge.com
SolarEdge Technologies GmbH, Werner-Eckert-Str. 6, 81829 Munich, Germany
Subject to change without notice.
© SolarEdge Technologies, Ltd.
All rights reserved. March 2023.
WARNING!
To avoid danger, read the HANDLING AND SAFETY
INSTRUCTIONS provided with this product, or refer to:
https://www.solaredge.com/sites/default/files/se_handling_and_saf
ety_instructions.pdf
Before installation, read the datasheet provided with this product,
or refer to:
https://knowledge-center.solaredge.com/sites/kc/files/se-
home-hub-single-phase-inverter-datasheet-eu.pdf
Tools and Materials
Drill
Pencil
Open-end 10mm
Torque wrench
torque wrench
with 4 mm Allen bit
20 cm
20 cm
20 cm
CAUTION! DO NOT rest the inverter vertically on the connectors
1
AC Grid
L
N GND
NOTE:
according to regulation
Level
MC4 crimper
Wire Cutter
Small Flat-Blade
Phillips/Flat-
(2mm)
Blade
Screwdriver
screwdriver set
20 cm
1
4
5
6
7
3
2
1
4
3
2
WARNING!
HAZARD OF ELECTRIC SHOCK.
DISCONNECT POWER BEFORE INSTALLATION OR SERVICE
WARNING!
Connect the grounding wire first
Use a protective device
WARNING!
Do NOT connect
a protective device with a higher
rating than 50A. Make sure to
use a protective device with a
rating of 28A or higher for
maximal backup rating of 6kW
(applicable to all models)
Hammer
min 2
Mounting screws and
wall plugs - max M10
1-10 mm
2
18 mm
60 mm
9-21 mm