Anker Nebula Vega, Nebula Vega Portable - Projector Quick Start Guide

Placement

1. Place Nebula Vega / Nebula Vega Portable on a flat, stable surface.
2. Open the projector nameplate as illustrated to use it as a stand.

Charging Your Projector

Preparing the Remote Control

1. Slide down to open the battery compartment.
   
   
2. Insert new batteries, matching the polarity (+ / -) as indicated.
   

Powering On / Off

1. Nebula Vega: Press to power on.
   Nebula Vega Portable: Press and hold for 2s to power on.
2. Press and hold . A menu pops up. Select Power Off to turn off the projector.
3. When the projector is in standby mode, press to turn on / off the projector.

Adjusting the Focus

Press the button on the remote control to adjust the focus.

Control Buttons

Downloading the Nebula Connect App

1. Download the Nebula Connect app from the App Store (iOS devices) or Google Play (Android devices) to control your projector.
   
   
   
2. Enable Bluetooth on your smartphone.
3. Open the Nebula Connect app, and follow the on-screen instructions to complete the connection setup.

Chromecast™

Wirelessly cast movies, games, and music from your phone to Nebula Vega / Nebula Vega Portable.

1. Play a video clip on your phone and then tap the cast icon on the video screen.
2. Select the device "D2120" or "D2121" you want to cast to.
   • This projector will mirror the screen of the connected phone or computer.

Make sure Nebula Vega / Nebula Vega Portable and your phone are connected to the same wireless network.

Playing Video from HDMI / USB Devices

The HDMI port and USB port cannot be used to simultaneously stream video and audio content.