Immergas MAGIS Instruction And Warning Book page 7

POLYPHOSPHATE DISPENSER LOADING WITH
SOLUBILIZATION DISC.
Close the cold water shut-off valve. Open the closest hot water
tap to release pressure in the hot water circuit.
Clean the basin, the bellow and the solubilisation disc with clean
water Pour a glass of water (60 cc) into the basin.
Cut a corner of the 80 gr sealed bag with the Cillit®-55 M-H
Universal and pour the whole content into the water of the basin.
Rest the basin vertically on a surface and wait 5 minutes for the
product to solidify in the water.
After 5 minutes, remove excess water on the product.
Put the solubilisation disc on it, insert the basin on the head
and tighten the ferrule.
With the deaeration screw still loose, open the cut-off cocks and
wait 2 minutes for the complete deaeration. When only water is
coming out, close the deaeration screw.
Let the water flow for another 2 minutes, then loosen again the
deaeration screw to check that deaeration is complete.
Close the deaeration screw. The dispenser is ready for use.
7