ANKER Bolder LC90 - Flashlight Welcome Guide and Review Video

Safety Instructions

• The light source of this flashlight is not replaceable; when the light source reaches the end of its life, the whole flashlight needs to be replaced.
• Avoid hitting or dropping the flashlight.
• Do not stare directly into the beam or shine it directly into anyone's face. Doing so for more than a few seconds could cause retinal damage.
• Do not allow children to use the flashlight unless under the supervision of an adult.
• Only recharge the battery in a dry place indoors.
• Use only the provided battery, or one of the same type with circuit protection from a reputable manufacturer.
• 18650 Li-ion batteries are powerful cells, so treat with caution. Using high-quality batteries with circuit protection reduces the potential risk of combustion or explosion.
• Do not attempt to recharge non-rechargeable batteries. This can cause them to overheat or leak.
• Do not use metal objects to connect the terminals of the battery.
• Do not use the battery near fire or in places with high temperatures, or apply excessive force as that can cause the battery to explode.
• Check the battery regularly for any signs of damage or leakage. Do not charge a damaged or leaking battery.
• The battery must be removed from the flashlight before the flashlight is disposed of.
• An exhausted or leaking battery should be removed from the flashlight and disposed of safely according to local environmental regulations.
• When not using the flashlight for long periods of time, please remove the battery and store in a cool, dry place.

At a Glance

1. Flashlight head
2. Light zoom adjustment slider
3. Battery compartment
4. Battery compartment cap
5. USB charging port
6. LED charging indicator
7. Tail cap
8. On / Off button
9. Lanyard
10. 18650 rechargeable battery
11. Micro USB charging cable

Installation

Only use an 18650 Li-ion battery.

• Unscrew the tail cap and battery cap.
• Install 1 × 18650 Li-ion battery (included).
• Securely replace the battery cap and tail cap.
  

Follow the same method to remove the battery.

Operation

Momentary-On		Press halfway (and hold) to activate the light momentarily.
Continuous		Press all the way to completely turn on the flashlight. Press again to turn it off.
Lighting Modes High / Medium / Low Strobe / SOS		To switch between the 5 lighting modes: Momentary-On: release and press halfway again within 2 sec. Continuous: turn off and on again within 2 sec.

• Zoom
  Pull in for floodlight and push out for spotlight.
  
• Memory Function
  The flashlight memorizes the last lighting mode used. When the flashlight is turned on next time, it will activate the last lighting mode you selected.

Charging

The flashlight will blink 3 times when the battery is nearly depleted and needs to be charged.

• Unscrew the tail cap.
  
• Connect the USB cable.
  

Specifications

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Customer Service

18-month limited warranty

Lifetime technical support

support@anker.com

1-800-988-7973 | Mon-Fri 9:00-5:00 PST (US)
01604-936200 | Mon-Fri 6:00-11:00 (UK)

For FAQs and more information, please visit:

@Anker
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@Anker

Videos

Anker Bolder LC90 900 lumens LED flashlight Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ANKER Bolder LC90 - Flashlight Welcome Guide and Review Video