Anker Nebula Capsule 3 Laser Quick Start Guide
At a Glance
Front View
Rear View
Top View
Bottom View
Enable Autofocus
- Slightly move the projector to enable autofocus and auto keystone correction.
- Press and hold for 2 seconds to enable autofocus.
Basic Setup
For first-time use, follow the on-screen instructions to complete the basic setup. Adjust settings in the projector's Settings menu if necessary.
Use as a Projector
Screen Mirroring
Wirelessly cast movies, games, and music from your phone to Nebula Capsule 3 Laser.
- Play a video clip on your phone and tap the 1 cast icon on the video screen.
- Select the device 2 D2426. The projector will mirror the screen of the connected phone.
Make sure Nebula Capsule 3 Laser and your phone are connected to the same wireless network.
Play from HDMI Playback Devices
Connect to HDMI playback devices such as a TV box, TV stick, DVD player, set-top box (STB), or gaming consoles.
Play Through External Sound Devices
Connect to external sound output devices, including headphones and speakers.
Play from a USB Drive
Connect to a USB-A drive (with the USB converter) or USB-C drive to enjoy stored music, video, and pictures.
Important Safety Instructions
- Due to the enclosure material, the product must only be connected to a USB 2.0 or higher.
- The adapter shall be installed near the product and shall be easily accessible.
- Please ensure you use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the product and the guarantee article.
- Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments.
- It is recommended to supply the product in an environment with a temperature that ranges from 5°C-25°C.
- When supplying, place the device in an environment that has a normal room temperature and good ventilation.
- Possibly hazardous optical radiation emitted from this product may be harmful to the eyes. Do not stare at operating beam.
- Potential hazards may exist during lamp or product servicing.
- Service shall be performed only by authorized, trained servicing, trained servicing personnel.
- Do not open the enclosure of the product.
- When the enclosure of the product is damaged, please do not use it anymore.
- Do not open the enclosure of laser module inside the product.
- When the enclosure of laser module inside the product is damaged, please do not use it anymore.
- Laser inside, be aware of the risk of skin or corneal burns.
- Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
- User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances
- Replacement of a battery with an incorrect type that can defeat a safeguard;
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Attention:
- Remplacement d'une batterie par un type incorrect pouvant supprimer une protection;
- Mise au rebut d'une batterie dans un feu ou dans un four chaud, ou écrasement mécanique ou coupure d'une batterie, susceptible de provoquer une explosion;
- Maintien d'une batterie dans un environnement à très haute température pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables; et
- Batterie soumise à une pression de l'air extrêmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
For a detailed user manual and more information, scan the QR code or visit:
support.seenebula.com/s
support@seenebula.com
support@anker.com (日本)
support.mea@seenebula.com
(For Middle East and Africa Only)
CED-CN@anker.com(中国)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 42428633 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036(中国)
03 4455 7823(日本)
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries.
Model: D2426
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Anker Nebula Capsule 3 Laser Quick Start Guide
Need Assistance?
Do you have a question about the Nebula Capsule 3 Laser that isn't answered in the manual? Leave your question here.