NETGEAR WG102 Configuration Manual

Wireless repeating: use and configuration

Hide thumbs Also See for WG102:

Download this manual See also: Reference Manual, User Manual

– Wireless Repeating: Use and Configuration

WG102

CONFIGURATION

The layout for this example will be a WG102 as the MASTER Access Point, and two other

WG102 as REPEATER units for two areas in a building.

All the devices must use the exact same settings,

address, use another unallocated address in the same subnet - Same SSID, same channel,

same encryption, and so on. (All these settings can be found in the basic and wireless settings)

CONFIGURATION

Once this access point has its basic configuration set and you've confirmed it to be working

properly, go to the 'Access Point Settings' section and verify it has no options selected.

– How to set up the access points:

– Central "Master" unit:

with the exception of their IP

address; for the IP

Page 1 – How to set up the access points: CONFIGURATION The layout for this example will be a WG102 as the MASTER Access Point, and two other WG102 as REPEATER units for two areas in a building. All the devices must use the exact same settings, address, use another unallocated address in the same subnet - Same SSID, same channel, same encryption, and so on.
Page 2: Verifying The Connection
– Secondary “REPEATER” units: CONFIGURATION Once this access point has its basic configuration set and you’ve confirmed it to be working properly, go to the ‘Access Point Settings’ section and enable wireless bridging and repeating, select ‘Repeater with Wireless Client Association’.