Contents ........................1 AFETY NFORMATION PERATING CONDITIONS ............................1 OCATION SAFETY INSTRUCTIONS ONNECTIONS UALIFIED SERVICE ..................3 RODUCT OVERVIEW AND CONNECTIONS NTRODUCTION OTE AND AUTION ACKAGE CONTENTS 2.1 IP P ........................3 IGURE HONE ABLE ONNECTIONS Connecting to the Network and the PC ..........................4 Powering up the Phone ................................
Page 4
ENU LIST 5.1 O LCD D ........................34 IGURE PERATION ISPLAY .............................. 35 PERATION MENU DISPLAY Home operation menu display ..............................35 Config Menu Display ................................. 35 Admin Menu Display ................................. 36 Option Menu Display ................................37 Detailed LCD menu settings ..............................38 ...................
Page 5
Via WebGui ................................107 Via APS................................... 108 Via Telnet ................................109 HTTPS APS ........................... 110 MPROVE FEATURE Feature Activation ................................110 Via WebGui ................................110 APS ....................111 UPPORT NCRYPTION OF ONFIGURATION FILES IN Feature Activation ................................113 Via WebGui ................................113 Via APS...................................
Page 6
Feature Activation ................................165 ST20XX SIP N .62) ........................169 EATURES VERVIEW PBX- ....................169 ECOND DIAL TONE FOR LIKE ENVIRONMENTS Feature Activation ................................171 ........................173 EW SPECIFIC KEYS IN THE Feature Activation ................................174 ....................176 EW ERROR MESSAGE DISPLAY FOR RESPONSE Feature Activation ................................
ST2030s VoIP Business Phone Part 1 Safety Information Operating conditions This telephone is to be operated on a local area network. The telephone must be equipped with the appropriate software version. This guide is written for the actual version of firmware v2.69, you can download the latest on: http://www.thomsonbroadbandpartner.com Read these instructions carefully before connecting the SIP phone to its power source.
No repair can by performed by the customer, if you experience trouble with this equipment for repair or warranty information, please contact your administrator. Thomson disclaims all responsibility in the event of use that does not comply with the present instructions.
Part 2 Product overview and connections Introduction This administrator guide describes how to set up, connect cables, and configure your ST2030 SIP Phone. It also provides information on how to configure the Network settings and change the settings of your IP Phone. The administrator guide also includes the way to view and upgrade the firmware.
ST2030s VoIP Business Phone Connecting to the Network and the PC The SIP Phone has 2 RJ-45 ports that each support 10/100 Mbps full duplex Ethernet connection to external devices- Network port and access port (one for PC and one for LAN). ...
Note Supported Features In addition to the physical features illustrated in Figure 3.1 and table 3.1, your Thomson ST 2030 also provides the following: Technical specifications: An integrated 2 Ethernet ports switch that allows the telephone and a computer to share a single Ethernet jack.
Redial, Mute, Call log, phone book (30 entries), 10 Speed dial memory keys Hands free (full-duplex) Supported Protocols Your Thomson ST 2030 SIP Phone supports the following standard Internet protocols: Internet Protocol (IP) IP is a network layer protocol that sends datagram packets between nodes on the Internet.
Page 15
ST2030s VoIP Business Phone Network Time Protocol (NTP) NTP is an Internet standard protocol that assures accurate synchronization to the millisecond of computer clock times in a network of computers. NTP sends periodic time requests to servers, obtaining server time stamps and using them to adjust the client's clock.
ST2030s VoIP Business Phone Abbreviations Session Initiation Protocol. An IP telephony signalling text-based protocol developed by the IETF Domaine Name Server DHCP Dynamic Host Control Protocol File Transfer Protocol H323 An ITU standard for realtime voice and videoconferencing over packet networks, including LANs, WANs and the Internet Local Area Network MGCP...
ST2030s VoIP Business Phone Part 3 Phone operations General appearance The general appearance of the ST2030 is as below: ST2030 front view ST2030 side view ST2030 with his extension module ST2030s SIP Administrator Guide v3.0 Page 9 of 308...
ST2030s VoIP Business Phone Physical Features Figure 3.1 and Table 3.1 illustrate physical features of the ST2030 SIP Phone: Volume keys 3 Soft Keys Clear key Menu Move & Scrolling keys Functions keys(*) Handset Dialing Memory keys * Keys from left to right: phone book/ headset/ speaker/ mute and redial.
ST2030s VoIP Business Phone Display keys Confirmation key: Clear key: Clear characters in editing mode or exit to standby display (long click) or return back to the previous page. Menu key: Enables access to menu Phone book key: Enables to access the phonebook and view the names and phone numbers the user wants to dial.
Page 20
ST2030s VoIP Business Phone Audio keys Volume keys: Adjust the volume of the handset, headset, speaker phone, ringer phone. Speaker key: Activates/disables hands free or group-listing function and switch on/off the microphone Headset key: Activates headset mode during a call Mute key: Activates/deactivates mute function.