Immergas MAGIS M4-30 Instructions Manual page 21

Press "OK" and " " becomes " ". Timer 1 is selected. Press "OK" again and " " becomes " ". Timer 1 is unselected.
Use " " , " " , " " , "
peratures can be set.
For example: now it is 8:00 and the temperature is 30°C. We set the PRESET TEMP. as in the table below.
page is displayed:
INFORMATION
i
When the space operation mode is changed, PRESET TEMP. automatically switches o .
e PRESET TEMP. function can be used in Heat mode or Cool mode. However if the operation mode is changed, the
PRESET TEMP. function needs to be restored.
e current preset temperature is not valid when the unit is OFF. When the unit is switched back on, it will run at the
next preset temperature.
6.2.2 WEATHER TEMP. SET
• WEATHER TEMP. SET = WEATHER TEMPERATURE SET
• e WEATHER TEMP. SET function allows you to preset the desired water ow temperature based on the outdoor air
temperature. When the weather heats up, heating is turned down.
perature is reduced when the outdoor temperature increases and the Heat mode is active.
PRESET TEMPERATURE TEM P ER A TU R E P R ED EF I N I TE
P R ESET P R ED EF I N .
TEMP.
TEM P .
N .
NO.
O K A N N U L L A
CA N CEL
" to scroll and use " " and "
NO. N .
TEM P .
TEMP.
W EA TH ER CL I M A ECO
ECO
TEMP.SET
I M P . TEM P . MODE M O D O
TEM P O TEM P .
TIME TEMP.
" to adjust the time and temperature. Six periods and six tem-
TEM P O TIME TEMPER. TEM P ER .
erefore to save energy, the desired water ow tem-
21
e following