Advertisement
Connect via WPS button
WPS is a faster method to connect your extender to the WiFi network. Make
sure your router supports WPS and has a button similar to the following
icons. Press the button on your router and then the extender within a short
period of time. Wait until you see the "xxxxxx_ext" on your nearby network,
which means that the setup is complete. The password is the same as your
original router.
Troubleshooting
Problem
I cannot find the extender
from the WiFi network.
I cannot log in to the
settings page.
Possible solution
Make sure the extender is
powered on and the WLAN
indicator is solid green. Try to
factory reset the extender if you
cannot search for the device.
Make sure the login and password
is correct. Try to reset the device
and try again.
Page 12
Advertisement
