Immergas 3.031483 Instruction And Warning Book page 15

WIRING DIAGRAM FOR IND O OR UNIT WITH
OPTIONAL SECOND ZONE KIT IN SOLAR OR DOMUS
CONTAINER.
4
1
Key:
1 - Second mixed zone circulator connection
2 - Flow probe connection
3 - Safety thermostat connection
4 - 3-way valve connection
5 - Second mixed zone circulator
6 - Cable holders
6
6
6
4 6
3
2
5
15
Once the kit is assembled, proceed with the
wiring according to the wiring diagram in the
instruction booklet.
- Connect the cables in the electrical panel of
the Indoor Unit as shown in Fig. 5..
- Lower the wiring coming out of the electri-
cal panel until it can be secured through the
clamps (6).
- Connect the connector of the delivery probe
(2) and of the safety thermostat (3).
- Connect the circulator (5) to the connector (1).
- Connect the 3-way mixing valve connector (4).
N.B.: wind the uncovered fittings with the
insulation present in the kit.