Related Manuals for THOMSON 512269
Summary of Contents for THOMSON 512269
- Page 1 512269 Smart video intercom Smart Connect 105° Visitors memory (video or pictures) 105° Visitors memory (video or pictures) www.mythomson.com...
- Page 2 VIDEOPHONE SMART CONNECT Figure 1 100m max Connection from the intercom panel to the monitor Cable length Section to use 5 to 50 m 0.75mm 50 to 100m 1.5mm Connecting of the dry contact (gate automation) or electric strike plate to the intercom panel Cable length Section to use 0 to 25m...
- Page 3 VIDEOPHONE SMART CONNECT Figure 2 100m max www.mythomson.com Moniteur supplémentaire (512264)
-
Page 4: Table Of Contents
VIDEOPHONE SMART CONNECT TABLE OF CONTENTS A - SAFETY INSTRUCTIONS 1 - INTRODUCTION 2 - MAINTENANCE AND CLEANING 3 - RECYCLING B - PRODUCT DESCRIPTION 1 - KIT CONTENTS 2 - GENERAL INFO 3 - MONITOR 4 - INTERCOM PANEL 5 - WALL BRACKET 6 - MAINS ADAPTOR C - INSTALLATION... - Page 5 3 - INSTALLING THE SMART BRACKET 4 - DIAGNOSTICS AND INSTALLATION 5 - INSTALLATION OF THE MAIN OR ADDITIONAL INTERCOM PANEL 6 - SMARTPHONE APPLICATION 6.1 - Connecting a monitor to the WiFi network F - TECHNICAL AND LEGAL INFORMATION 1 - GENERAL CHARACTERISTICS 2 - WARRANTY 3 - HELP AND ADVICE...
-
Page 7: A - Safety Instructions
VIDEOPHONE SMART CONNECT A - SAFETY INSTRUCTIONS 1 - INTRODUCTION • Do not install near other electronic devices such as computers, televisions or video recorders. This video intercom system pairs two modules: a receiver-monitor and an easy-to-install and • Do not install near acidic chemicals, ammonia or sources of toxic gases. -
Page 8: B - Product Description
VIDEOPHONE SMART CONNECT B - PRODUCT DESCRIPTION 1 - CONTENTS OF THE KIT 7"monitor Plug-in power supply “Smart” wall bracket 5 RFID badges: 2 users (grey), 1 admin Intercom panel and protective shield (yellow), 1 badge - (red), 1 badge + (blue) 2 - GENERAL INFORMATION This videophone is composed of an interior response station with touch-sensitive buttons and an exterior panel with an intercom and camera, allowing the person inside to see and communicate with the visitor... -
Page 9: Intercom Panel
VIDEOPHONE SMART CONNECT B - PRODUCT DESCRIPTION Indicator light for connecting an additional Intercom panel connection indicator light monitor Red = intercom panel Red = Connection error not connected (wire unplugged or cut)* Blue = Connection OK or monitor not present Blue = connection OK * This is completely normal if the monitor is Power supply indicator light... -
Page 10: C - Installation
VIDEOPHONE SMART CONNECT C - INSTALLATION the description of the intercom panel (Section 4 Important notes and advice: - Intercom panel) at the back of the board (no • In order to make the most of your intercom panel, we advise you to configure it (loudspeaker polarity to follow). •... -
Page 11: Add One Or More User Badges
VIDEOPHONE SMART CONNECT C - INSTALLATION 4. S wipe the - badge (red), a long beep confirms 2.2.5. Use of badges the end of the programming of administration To open the electric strike plate, quickly swipe badges. your pre-programmed grey user badge on the RFID reading field. One short beep confirms the opening of the electric strike plate. To open the gate motor, hold the badge in front of the RFID scan area for 3 seconds. -
Page 12: Diagnostics And Installation
VIDEOPHONE SMART CONNECT C - INSTALLATION Indicator light for connecting an additional monitor Red = Connection error Blue = Connection OK or monitor not present Power supply indicator light Red = Connection error Blue = Power supply correctly connected Intercom panel connection indicator light : Red = Reverse polarity Blue = Wiring OK Intercom panel connection indicator light... -
Page 13: Installation Of The Main Or Additional Intercom Panel
6 - SMARTPHONE APPLICATION 6.1. Connecting a monitor to the WiFi network • Download Thomson Smart Connect application onto your smartphone. From the Apple store or Play store •. On your monitor, go to the WiFi menu •... - Page 14 For ease of use, make sure your phone is connected to the 2.4GHz WiFi network that will need to be connected to the monitor. • From the Thomson Smart Connect application, click on "+" to add a device. The application asks you to verify that your videophone is in pairing mode.
- Page 15 VIDEOPHONE SMART CONNECT C - INSTALLATION The WiFi network to which your phone is connected Choose the name of your videophone appears. To change it, click on "change WiFi". If no network appears, your phone is probably in 3G/4G. When the WiFi 2.4GHz network you want appears, enter the password.
-
Page 16: F - Technical And Legal Information
VIDEOPHONE SMART CONNECT F - TECHNICAL AND LEGAL INFORMATION 1 - GENERAL CHARACTERISTICS Monitor and smart bracket Number 6 doorbell melodies to choose from (85dB) Doorbells Size 7 inches diagonally (17.78cm), 16/9 Screen Resolution 800 x 480 100 photos Picture memory capacity 15V/1A Supply voltage Photos and videos... -
Page 17: Warranty
Smart Connect Videophone (512269) who will be glad to help. Complies with the RED directive and its conformity • If you encounter operating problems during... - Page 18 is a TECHNICOLOR S.A. brand used under licence by: Avidsen 19 avenue Marcel Dassault - 37200 Tours - France...