Immergas HYDRO 3 V2 User Manual page 68

- Timer switch-off:
1) With the appliance in the intended mode -by press
: and the remote controller will display "Timer Off ", and
"0.0H" will appear in the timer area. With the appliance
running, use the and
of operation of the appliance, after which it will turn off
automatically.
2) Press to set the number of hours after which the ap-
pliance will turn off automatically.
3) Once the adjustment is done, the timer information is sent
to the indoor unit.
Note:
• Timer Off can be set only when the unit is powered on and
Timer On can be set only when the unit is powered off.
• When Timer On is being set, you can set the power-on
mode, fan speed, and temperature.
• If the timing period is more than 10 hours, the timing
period increases by 1 hour.
• To change the time: Press the corresponding button, change
the time, and then confirm the changes.
• Adjust the Timer On or Timer Off to 0.0h to cancel the
Timer On or Timer Off settings.
keys to set the number of hours
38
Button lock.
Once the buttons on the remote controllers are locked, all the
other button operations except for Unlock and IDU Address
Setting are invalid.
1)Press and at the same time to lock the button, and
the screen will display the lock icon.
2)Press and at the same time, and the lock icon
will disappear. Button is unlocked.
68
39