Immergas HYDRO 3 V2 User Manual page 44

Take all necessary precautions during installation in the
event of strong winds or any atmospheric or telluric ca-
lamities.
Improper installation can cause the unit to fall and damage
property or injure people.
Do not install the fan coil in:
- Environments that contain petrolatum (e.g. petroleum
jelly, petroleum distillates).
- Environments with salty air (near coasts).
- Environments with caustic gases (e.g. sulphur) in the
air (near spa areas).
- Environments subject to strong voltage variations (in
factories).
- Bars or cabinets.
- Kitchens with large amounts of diesel.
- Environments with strong electromagnetic waves.
- Environments with flammable materials or gas.
- Environments with acidic or alkaline liquids in evapo-
ration.
- Other particular conditions.
When installation is complete, make sure the unit works
properly when started up.
Provide the customer with all information required for
correct operation and maintenance of the unit.
Order of installation:
- Choose the installation point;
- Install the indoor unit;
- Install the pipes;
- Install the drain pipe
- Connect the vent pipe;
- Wire the unit;
- Test operation.
1.3 HYDRAULIC CONNECTION.
Following the instructions further on in the manual, in-
stall the pipes to ensure optimal drainage and insulate
them to prevent condensate from forming.
Incorrect drain pipes can cause water leaks and damage the
device.
44