Immergas Hydro 3 Instructions And Warnings page 56

4.6 MODE SETTING.
Automatic mode (AUTO).
In automatic mode (AUTO), the air conditioning unit au-
tomatically selects the cooling (COOL) or heating (HEAT)
mode according to the ambient temperature present.
To activate it:
- press the "MODE" button and select the operation in au-
tomatic mode (AUTO);
- press the or buttons to select the desired temperature
setting.
Pressing the or buttons increases or decreases the tem-
perature by 1 °C.
When the fan is set to "AUTO" mode, the air conditioning
unit automatically adjusts the fan speed based on the ambient
temperature and can not be changed by the user.
Cooling mode (COOL).
In cooling mode (COOL), the air conditioning unit only
allows cooling.
To activate it:
-press the "MODE" button and select the operation in coo-
ling mode (COOL);
- press the or buttons to select the desired temperature
setting.
Pressing the or buttons increases or decreases the tem-
perature by 1 °C.
- Press the "FAN" button to select the fan speed.
Each time the "FAN" button is pressed, the fan speed changes
(see Fig. 23).
Note: in cooling mode, prolonged use of the appliance in
conditions of high humidity may cause drops of water to
fall from the outlet grid.
Dehumidifier mode (DRY).
In dehumidifier mode (DRY), the air conditioning unit
operates by removing moisture from the air.
To activate it:
- press the "MODE" button and select the operation in
dehumidification mode (DRY);
- press the or buttons to select the desired temperature
setting.
Pressing the or buttons increases or decreases the tem-
perature by 1 °C.
When the fan is configured in "DRY" mode, the air con-
ditioner selects the low fan speed to make the mode more
effective.
In the dehumidification mode, the functions "ECO" (eco-
nomic operation) and "FAN SPEED" (fan speed) are not
operational.
23
56
Heating mode (HEAT).
In heating mode, the air conditioner only allows heating.
- Press the "MODE" button and select the heating mode
operation (HEAT);
- press the or buttons to select the temperature setting.
Pressing the or buttons increases or decreases the tem-
perature by 1 °C.
- Press the "FAN" button to select the fan speed.
Each time the "FAN" button is pressed, the fan speed changes
(see Fig. 23).
Fan mode (FAN).
In fan mode (FAN) the temperature configuration is disabled.
- Press the "MODE" button and select the operation in fan
mode (FAN);
- press the "FAN" button to select the fan speed.
Each time the "FAN" button is pressed, the fan speed changes
(see Fig. 23).