Table of Contents
Advertisement
Available languages
Available languages
4.3 REMOTE CONTROL BUTTON.
4.4 REMOTE CONTROL MENU' .
Nr
Button
1
On / Off
The On / Off button allows the indoor unit to be switched on and off.
The fan speed is set in the sequence shown below, by pressing the "Fan speed setting" button: "AUTO
2
Fan speed setting
(automatic) - LOW (low) - MED (medium) - HIGH (high)".
3
Adjust
Increases the set temperature.
Air direction
4
Activate the "Wind horiz swing" function or the air deflector. After pressing, the deflector turns 6 °.
setting
Shows the time (when the unit is reset or turned on for the first time, 12.00 appears). Press the "Clock" button
5
Time setting
for 5 seconds. The time icon flashes for 3 seconds. Press again and the minute icon will flash. The
keys are used to set the values. After setting the value, confirm it by pressing the "OK" confirmation key.
This button is used to activate and configure the programmed power-on function. At each pulse the switch-
6
Timer On
on time increases by half an hour. When the selection exceeds 10 hours, the time will be increased from
hour to hour. Set the time to "0.0" and the automatic switch-on will be canceled.
This button is used to activate and configure the programmed shutdown function. At each pulse the switch-
7
Timer Off
off time increases by half an hour. When the selection exceeds 10 hours, the time will be increased from
hour to hour. Set the time to "0.0" and the automatic shut-off will be canceled.
Economic
Activate the economic operating mode. It is recommended to use this mode during sleep hours. With this parameter,
8
operation
the fan will operate in "AUTO" mode
(Inside the remote control). Press this button with a 1 mm needle to change from "Cool Only" mode to
9
Cool / Heat
"Cool and Hot" mode. During adjustment, a rear light is switched on. The factory default configuration
is in "Cold and Hot" mode.
Key:
1 - On / Off
2 - Fan speed setting
3 - Adjust
4 - Air direction setting
5 - Time setting
6 - Timer On
7 - Timer Off
8 - Economic operation
9 - Cool/ Heat
10 - Reset
11 - Lock
12 - Confirm button
13 - Wind horiz swing
14 - Wind vert. swing
15 - Adjust
16 - Mode setting
Function
54
21
and
Advertisement
Table of Contents
