Immergas Hydro 3 Instructions And Warnings page 53

4
PARAMETER
SETTINGS / USE
4.1 REMOTE CONTROLLER.
Key:
1 - Batteries cover
2 - Batteries compartment
3 - Batteries
4.2 INSERTING THE BATTERIES INTO THE
REMOTE CONTROL.
Insert two batteries AAA in the following way (Fig. 20):
- remove the batteries cover by pressing and pushing down.
- Insert the batteries into the remote control, checking the
correct position of the positive and negative poles indicated
inside the batteries compartment.
- Close the batteries cover.
- Press the On / Off button to verify that the batteries have
been inserted correctly.
Note: if the remote control does not work properly, remove
the batteries and replace them after a few minutes.
Note: in case of prolonged inactivity, remove the batteries
from the remote control.
Warning: in case of replacement, deposit the old batte-
ries in the appropriate containers. Do not throw in the
garbage waste.
53
20