Logitech G HUB Manual page 45

When you click on a SLOT you will have a drop down menu:
● DETAILS. Click this to take you to the details of the settings
assigned to that SLOT. This will show Lightsync, Assignments and
other features depending on your device. From that page you can
also click DISABLE FROM MEMORY which is the same as selecting
DISABLE in the drop down.
● DISABLE. Select DISABLE to disable that SLOT. You won't be able to
cycle to this slot with the on-board profile cycle assignment or use
this slot.
● RESTORE DEFAULT
behaviour.
● ENABLE WITH NEW/REPLACE
○ If the SLOT does not have a profile assigned, this will say
ENABLE WITH NEW. Select from the current profile list
below to assign a profile.
○ If the SLOT has a profile assigned, then this will say
REPLACE WITH. Select from the current profile list below to
replace the current profile with a different one.
2. RESTORE ALL ON-BOARD PROFILES TO
default behaviour. Similar if you clicked RESTORE DEFAULT PROFILE individually on each SLOT.
PROFILE. This restored the SLOT back to default
WITH.
DEFAULT. When you click this button, it will revert all the SLOTS back to
44