Steering Wheel - Logitech G HUB Manual

Steering Wheel

The Steering Wheel settings configure your wheel's sensitivity, turning and spring strength
1. Sensitivity. Default is 50. Alters the output response of the wheel to be more or less sensitive - sometimes
known as a S-Curve. Leaving this slider at 50% will provide a linear 1:1 output. Between 51% and 100% will
make the wheel increasingly more sensitive around the centre movement of the wheel. Between 0% and 49%
will make the wheel decreasingly sensitive around the centre movement of the wheel.
2. Operating Range. Default is 900 (450° either side), which is the maximum range. When you set a value, the
new value will be the hardstop. You will be able to push through the force feedback induced hardstop but no
more values will be read from the wheel as you have reached the maximum. For example setting the Operating
Range to 180 would have 90° either side.
3. Centering Spring in Force Feedback
normally have this disabled off because the games will be modelling the correct return to centre function of
your wheel based on what the virtual car is currently doing. Should you wish to override this you can enable
this and adjust the strength of that return to centre force using the slider
4. Centering Spring
spring strength, 0 being no centering spring at all.
5. PER-PROFILE STEERING WHEEL SETTINGS
profiles.
6. GEAR SETTINGS. Click this to take you to the Gear Settings page
7. PROFILE SELECTOR. Click here to change the User Profile you want to configure for.
8. BACK ARROW. Click the arrow to take you back to the Homepage.
Games. Unticked by default. For the vast majority of titles you would
Strength. Default is 10. Adjust the value of this to your preference. 100 being the strongest
LOCK. Lock this to set the Steering Wheel configuration for all your
40