Logitech G HUB Manual page 21

2. SHOW COMMAND
the key to the color of the group the command comes from. In the example below, we have changed the group
color and dragged Open Search to the G1 key. The G1 key will now illuminate that color regardless of the
LIGHTSYNC setting.
Note: Command Lighting will override any LIGHTSYNC effect, freestyle or animation.
3. Search for a command. User the search box to look for a specific command
4. Command list. Use the scroll bar on the right to scroll through the list of commands, drag that command to an
available button or key on your device
5. Mode Selection. If your keyboard supports multiple mode buttons, click which mode you want to configure. IN
the example above, the configuration is set to Mode 1 (M1) and that is highlighted white.
6. DEFAULT | G-SHIFT. Switch between the 2 modes to double up your command assignments.
7. Per-profile Assignments
set of assignments to be there for all profiles.
8. GEAR SETTINGS. Click this to take you to the Gear Settings page
9. PROFILE SELECTOR. Use the drop down to change the User Profile you want to configure for. Also it will
indicate if the profile is in a PER-PROFILE CONFIGURATION
10. BACK ARROW. Click the arrow to take you back to the Homepage.
LIGHTING. Tick this box to enable colors per command group. This will change the color of
lock. Click to make Assignments persistent across all profiles. This locks/unlocks this
or in a PERSISTENT CONFIGURATION
20