Pattern - Logitech G HUB Manual

3. NORMAL. Click NORMAL to change the colour of the LEDs for the metering during normal levels. The color
palette will expand, select a new colour using the Hue and Brightness sliders or select a different swatch
NOTE: You can change the color of the LEDs but you can't change which LEDs are assigned to PEAK, HIGH and NORMAL.
So for example, PEAK will always be the 11th METERING LED.

PATTERN

Press the PATTERN button at the back of the device to cycle between the 4 polar patterns: STEREO > OMNI > CARDIOID
> BIDIRECTIONAL > STEREO
1. STEREO. Click STEREO to change the colour of the stereo polar pattern indicator. The color palette will expand,
select a new colour using the Hue and Brightness sliders or select a different swatch
2. OMNI. Click OMNI to change the colour of the omni polar pattern indicator. The color palette will expand,
select a new colour using the Hue and Brightness sliders or select a different swatch
3. CARDIOID. Click CARDIOID to change the colour of the cardioid polar pattern indicator. The color palette will
expand, select a new colour using the Hue and Brightness sliders or select a different swatch
4. BIDIRECTIONAL. Click BIDIRECTIONAL to change the colour of the bidirectional polar pattern indicator. The
color palette will expand, select a new colour using the Hue and Brightness sliders or select a different swatch
5. EFFECT. Choose between FIXED or BREATHING for all polar patterns. If you select BREATHING, then the SPEED
slider will appear.
6. SPEED. Use the SPEED slider to adjust how quickly the effect happens. With 1000ms (1s) is the quickest and
20000ms (20s) is the slowest.
113