2: G Hub Settings - Logitech G HUB Manual

2: G HUB Settings

Settings page explained:
1. CHECK FOR UPDATE. Click this text to see if there are updates.
Note: G HUB will typically look for updates and you will be notified when there is a new one ready to install
2. VERSION: This is the version number of the software. Year | Version | Build. Please quote this number when
submitting feedback. Click the version number to show the update notes for that version.
3. SEND FEEDBACK. Click this button to send feedback to the Logitech Team. We welcome new ideas, your
thoughts and any bugs you find!
4. Select between the APP SETTINGS, MY GEAR and ARK CONTROL
show all your devices that have been connected and downloaded to G HUB. You can then click on the Gear to
take you to the GEAR SETTINGS page.
Note: If you have a wireless device and it is not connected (I.e. powered off), you will need to power the device back on
to go to the GEAR SETTINGS page.
5. START UP. By default this is ticked, to allow G HUB to run in the background when you log onto your PC/Mac.
Uncheck this to manually start G HUB.
(explained later) tabs. Clicking MY GEAR will
9