Nebula Mars II Pro Quick Start Guide

Overview

Front View

* Slide down to power on and automatically adjust focus, slide up to power off

Rear View

Top View

* Press to confirm a selection / play or pause

Bottom View

Remote Control

Getting Started

Prepare the remote control

For first-time use, remove the battery insulation tab to activate the remote control battery.

To replace the battery, slide to open the battery compartment, insert new batteries (matching the polarity (+/-) indicated), and close the battery compartment.

Charge your projector

Fully charge the built-in battery before using for the first time (charger is not provided).

LED indicators will light on when the battery is charged.

Power on / off

To turn on / off the projector, slide down / up the lens cover.

When the projector is in standby mode, press to turn on / off the projector.

Adjust the focus

After the projector is turned on:

• Slightly move the projector to engage autofocus.
• Press and hold the on the remote control to manually adjust the focus.

Nebula Connect App

Download the Nebula Connect app from the App Store (iOS devices) or Google Play (Android devices).

Enable Bluetooth on your smartphone and select [Nebula] as the device to be connected.

Open the Nebula Connect app and follow the on-screen instructions to complete the connection setup.

Important Safety Instructions

• Due to the enclosure material used, the product must only be connected to a USB interface of version 2.0 or higher.
• The adapter must be installed near the device and must be easily accessible.
• Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.
• The ideal temperature range for this product and its accessories is 14°F - 95°F / -10°C - 35°C.
• When charging, place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 41°F - 77°F / 5°C - 25°C.
• Only use the charger provided by the manufacturer. Using unauthorized chargers may cause danger and violate the authorization of the projector and the guarantee.
• This charger is for indoor use only.

For FAQs and more information, please visit: www.SeeNebula.com

support@SeeNebula.com
+1(800) 988 7973 (US) Mon-Fri 9:00 am - 5:00 pm (PT)

© Anker Innovations Limited. All rights reserved.

NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries.

Model: D2323
51005001616 V01