Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Anker Nebula Capsule 3 Laser
Summary of Contents for Anker Nebula Capsule 3 Laser
- Page 1 User Manual Nebula Capsule 3 Laser Model: D2426 Nebula Capsule 3 Laser...
-
Page 2: Table Of Contents
Table of Contents Important Safety Instructions What's Included At a Glance 1. Projector 2. Remote Control 3. LED Light Guide Getting Started 1. Prepare the Remote 2. Position Your Projector 3. Charge Your Projector 4. Power On / Off 5. Auto Focus and Keystone 6. -
Page 3: Important Safety Instructions
Important Safety Instructions Read all instructions before you use this product. Do not make any changes or create settings that are not described in this manual. If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply. - Page 4 Using unauthorized adapters may cause danger and violate the authorization of the product and the guarantee article. • User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes.
- Page 5 • Replace the remote control batteries only with the same or an equivalent type. • Batteries contain chemical substances and they should be disposed of properly. • Charge this device regularly. Do not store this device with a completely discharged battery. Warning •...
- Page 6 Caution • Possibly hazardous optical radiation emitted from this product may be harmful to eyes. • Do not stare at the operating beam. Laser Safety • RG1 IEC 62471-5:2015 • Complies with IEC 60825-1:2014 Class 1 and IEC 62471-5:2015 Risk Group 1. •...
-
Page 7: What's Included
What’s Included Nebula Capsule 3 Laser Adapter Charging Cable Remote Control AAA Battery × 2 Quick Start Guide... -
Page 8: At A Glance
At a Glance 1. Projector Front View Lens Camera (for autofocus and auto keystone correction) - Page 9 Rear View Speaker AUX-OUT Socket • Connect to an external sound output device. Infrared Receiver Mode Button • Press to switch between Bluetooth speaker mode and projector mode. Power Button • Press and hold for 3 seconds to power on / off. •...
- Page 10 Top View Volume Up / Down Buttons Confirmation Button Return Button Navigation Buttons Bottom View 1/4" Tripod Socket...
- Page 11 Dimensions 167.5 (H) x 83.0 (D) mm / 6.6 (H) × 3.3 (D) in 83.0mm...
-
Page 12: Remote Control
2. Remote Control Adjust focus Navigation Return to the previous menu Power on / off or switch to standby mode Activate the Google Assistant Confirm a selection / Pause / Resume Access more options Access the home menu Volume up / down... -
Page 13: Led Light Guide
3. LED Light Guide Button LED Status Description Steady blue Powered on Light off Powered off Steady orange Standby mode / Charging Steady green Fully charged Flashing red Low battery Ready to pair / Bluetooth pairing / Flashing blue Bluetooth disconnected (Bluetooth speaker mode) Bluetooth connected (Bluetooth Steady blue... -
Page 14: Getting Started
Getting Started 1. Prepare the Remote ① Slide to open the battery compartment. ② Insert new batteries matching the polarity (+/-) and close the battery compartment. ③ For first-time use, follow the on-screen instructions to pair the remote with your projector. The distance between the remote and the projector should not exceed 10 m / 33 ft. - Page 15 • It is unnecessary to tilt the projector towards the projection surface. You can correct the projection image with the built-in autofocus and auto-keystone correction. • You may also install the projector onto a tripod (sold separately). • The distance between the projector and the projection surface determines the projection image size.
-
Page 16: Charge Your Projector
3. Charge Your Projector For first-time use, fully charge your projector using the provided adapter and charging cable. 4. Power On / Off Press and hold the projector power button for 3 seconds to power on / off. 3” • You can also press and hold the power button on the remote for 3 seconds to power off. -
Page 17: Auto Focus And Keystone
5. Autofocus and Auto Keystone Correction To enable autofocus and auto keystone correction, slightly move the projector or press the on the remote. 6. Setup When using the projector for the first time, follow the on-screen display (OSD) instructions to complete the basic setup. •... -
Page 18: Nebula Connect App
Nebula Connect App To easily control the projector, we recommend you download the Nebula Connect app. ① Download the Nebula Connect app from the App Store (iOS devices) or Google Play (Android devices). ② Enable Bluetooth on your smartphone. ③ Open the Nebula Connect app and select [Capsule 3 Laser] > [XXXXXX] as the device to be connected. -
Page 19: Projector
2. Projector On the home page, select > [Projector Settings] and press [Brightness] Adjust brightness based on your environment. [Picture Mode]: The projector is preset with several predefined picture modes so that you can choose one to suit your environment and input source. •... - Page 20 [Manual Keystone Correction Access]: Manually perform keystone correction. [Zoom]: Zoom in or out of the projection image from 50% to 100%. [Auto Focus at Startup]: Automatically adjust the focus when the projector powers on. [Auto Focus After Movement]: Automatically adjust [Focus Settings] the focus when you move the projector.
- Page 21 [Bluetooth Speaker Enable Bluetooth speaker mode. Mode] [Projector Mode]: Select a way of placing the projector. • [Auto]: Automatically detects whether the projector is inverted. Automatically switch between these options. • [Front]: The device is located in front of the projection surface.
-
Page 22: Apps
3. Apps ① On the home page, select > [Apps], and press ② Select an app and check the current version, open or force stop the app, check the storage used, clear data or cache, uninstall the app, or enable or disable notifications and permissions. 4. -
Page 23: Others
Choose to show notifications on all Android devices [Chromecast built- connected to your Wi-Fi and let them control media casting to this device. [Screen Saver] Change the screen saver settings. [Location] Permit apps to estimate locations. Automatically send diagnostic information to Google, [Usage &... -
Page 24: Using Your Projector
You can wirelessly cast movies, games, music, and entire screen from your iOS, macOS, Android, or Windows device to Nebula Capsule 3 Laser. Make sure Nebula Capsule 3 Laser and your device are connected to the same wireless network. The network can be a WiFi network or your phone's hotspot. -
Page 25: Play From Hdmi Playback Devices
Certain content cannot be cast on Nebula Capsule 3 Laser due to copyright restrictions. You can stream the content via the same app installed on your projector. 3.2 Cast Device Screen You can cast the entire screen from your device to the projector. -
Page 26: Play From A Usb Drive
② Press to access the settings menu, then select [Device Preferences] > [Input] > [HDMI]. (Not included) The projector will automatically start HDMI playback once connected to an HDMI playback device for the first time. 5. Play from a USB Drive With this projector, you can enjoy music, video, and pictures, or install apps that are stored on a USB 2.0 drive. -
Page 27: Play Through External Sound Devices
6. Play Through External Sound Devices This projector can also be connected to external sound output devices, including headphones and speakers; when connected to external speakers, the built-in speaker system is disabled. ① Use a 3.5 mm audio cable or an adapter (not provided) to connect your headphones or external speakers. -
Page 28: System Update
② Enable Bluetooth on your smartphone and select Nebula Capsule 3 Laser to connect. < Settings Bluetooth Bluetooth Device Nebula Capsule 3 Laser Connected Pairing Connected To exit Bluetooth speaker mode, press on the projector or press and hold on the remote for two seconds. - Page 29 Standby Power < 0.5W Consumption Resolution 1920 × 1080 480p (60 Hz), 576p (50 Hz), 720p (30 Hz), 720p (50 Hz), 720p (60 Hz), 1080p (24 Hz), 1080p (30 Hz), 1080p (50 Hz), 1080p (60 Compatible Resolutions Hz), 4K2K (23.976 Hz), 4K2K (25 Hz), 4K2K (30 Hz), 4K2K (50 Hz), 4K2K (60 Hz), 4096 (23.976 Hz), 4096 (25 Hz), 4096 (30 Hz), 4096 (50 Hz), 4096 (60 Hz)
-
Page 30: Troubleshooting
Bluetooth Range 25 m / 82 ft USB Format FAT, FAT32 For Europe and UK, 0°C to 25°C Operating Temperature For other countries and regions, 0°C to 35°C / 32°F to 95°F AAA x 2 Remote Control Batteries Troubleshooting ① Fails to Power On •... - Page 31 the projector if necessary. ⑤ Distorted Image • Update the firmware to the latest version via [Settings] > [Device Preferences] > [About] > [System update]> [Check for update]. • Go to [Settings] > [Projector Settings] > [Image Correction], turn on [Manual Keystone Correction], and select [Manual Keystone Correction Access].
-
Page 32: Notice
This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/. - Page 33 Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK matters): Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with high-quality...
- Page 34 This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
- Page 35 shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973 5150~5350 MHz can be used indoors only. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
-
Page 36: Trademarks
Trademarks The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. -
Page 37: Warranty
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Warranty 30-Day Money-Back Guarantee for Any Reason You may return your undamaged product and packaging within 30 days of purchase to receive a FULL REFUND for any reason. If the reason for the return isn’t quality-related, the customer must pay for the return shipping.