KIT STAFFA FISSAGGIO A MURO
ACCUMULO INERZIALE 75 LITRI
COD. 3.027290
AVVERTENZE GENERALI.
Tutti i prodotti sono protetti con idoneo imballaggio da trasporto.
Il materiale deve essere immagazzinato in ambienti asciutti ed al
riparo dalle intemperie.
Il presente foglio istruzioni contiene informazioni tecniche relative
all'installazione del kit. Per quanto concerne le altre tematiche
correlate all'installazione del kit stesso (a titolo esemplificativo: si-
curezza sui luoghi di lavoro, salvaguardia dell' a mbiente, prevenzioni
degli infortuni), è necessario rispettare i dettami della normativa
vigente ed i principi della buona tecnica. L'installazione o il mon-
taggio improprio dell' a pparecchio e/o dei componenti, accessori, kit
e dispositivi potrebbe dare luogo a problematiche non prevedibili a
priori nei confronti di persone, animali, cose. Leggere attentamente le
istruzioni a corredo del prodotto per una corretta installazione dello
stesso. L'installazione e la manutenzione devono essere effettuate in
ottemperanza alle normative vigenti, secondo le istruzioni del co-
struttore e da parte di personale abilitato nonché professionalmente
qualificato, intendendo per tale quello avente specifica competenza
tecnica nel settore degli impianti, come previsto dalla Legge.
AVVERTENZE:
Prima di effettuare la foratura per fissare il supporto a muro con
gli appositi tasselli si consiglia di fare riferimento alle dimensioni
principali del boiler (Fig. 1) e alle relative sedi di fissaggio del telaio.
DIMENSIONI PRINCIPALI
Cod. 1.042129 - Rev. ST.003678/001
IT
BRACKET KIT FOR WALL MOUNTING
INERTIAL STORAGE TANK 75 LITRES
CODE 3.027290
GENERAL WARNINGS.
All products are protected with suitable transport packaging.
The material must be stored in dry environments and protected
against weathering.
This instruction manual provides technical information for installing
the kit. As for the other issues related to kit installation (e.g. safety
in the work site, environment protection, injury prevention), it is
necessary to comply with the provisions specified in the regulations
in force and principles of good practice.
Improper installation or assembly of the appliance and/or compo-
nents, accessories, kit and devices can cause unexpected problems
to people, animals and objects. Read the instructions provided with
the product carefully to ensure a proper installation.
Installation and maintenance must be performed in compliance with
the regulations in force, according to the manufacturer's instructions
and by authorised professionally qualified staff, intending staff with
specific technical skills in the plant sector, as envisioned by the Law.
WARNINGS:
Before making the holes to mount the bracket to the wall with
the dowels supplied, we recommend referring to the main boiler
dimensions (Fig. 1) and to the related fixing seats of the frame.
MAIN DIMENSIONS
IE
Fig. 1