Chapter 7: Meter Maintenance And Troubleshooting - Accu-Chek Guide User Manual

7
Meter Maintenance and Troubleshooting
Meter Maintenance
The meter automatically tests its own
systems every time you turn it on and lets
you know if something is wrong. See the
Error Messages section of this chapter.
If you drop the meter or think the results
are not accurate, contact Roche.
w WARNING
Keep new and used batteries away
from children. See the warning in the
Introduction of this User's Manual for
additional information.
Changing the Batteries
1
2
Release the old batteries by pressing the
button. Remove the old batteries.
6_07790953051_07790953050_02.indd 46
3
NOTE
• Always have a spare set of batteries.
• Battery life may vary due to factors
such as temperature and battery
manufacturer.
• The meter uses two 3-volt lithium
batteries, coin cell type CR2032. This
type of battery can be found in many
Open the battery door
stores.
on the back of the
meter by pushing the
• Always replace both batteries at the
tab in the direction of
same time and with the same brand.
the arrow and pulling
• The logbook data is saved when you
the door up.
replace the batteries.
46
Slide the new batteries
under the black tabs
and the button, with
the (+) side facing up.
Put the battery door
back in place and snap
it closed.
5/28/2020 11:34:17 AM